President Of Government And Political Affairs - 1130 Words

Millersville University American Presidency Conrad Dobler GOVT 215: Dr. Lawrence Department of Government and Political Affairs May 3rd, 2017 What does president do that makes the public feel as if they are strong, or powerful, and what determines a president to be labeled as limited? That’s really up to one s views on politics, their morals, and opinions. In this paper I will go over three of what I consider to be the best, and strongest Presidents history has ever had. The presidents will be judged on how they handled themselves in office, as well as any important decisions or problems they may have faced during their terms, and the legacy they have left in history. Also, how life for them before they were elected†¦show more content†¦From there he didn’t waste any time and got right to work. Theodore did so much for the country, he was known by many nicknames, such as â€Å"The Trust Buster†, â€Å"Rough Rider†, and of course â€Å"Teddy† (Bio). All because the country was rather fond of him and everything he has done. He is considered to be the first real modern presid ent, Theodore expanded on the power of the President. Using executive orders more often than any other president prior (Whitehouse.gov). As well as Presidential proclamations in ways no other president ever had before him. For Roosevelt, the people of the country were his top priority. He created a domestic policy called The Square Deal. This deal helped to protect the people from big businesses and offered consumer protection to all, and in general, he truly cared about the middle class as a whole. Roosevelt also instituted the sherman antitrust act, to help break up huge monopolies from taking over whole markets and holding back the already slow economy. Later in 1904, Theodore was elected as President. He then got back to work on the Panama canal, to make trade, imports and exports easier to do. As well as a more efficient way of getting navy vessels from coast to coast, which was a great idea, since Roosevelt beefed up the navy budget and expanded its fleets. Roosev elt also added to the monroe doctrine. This allowed the states to intervene with any affairs of the south or central america. This isShow MoreRelatedEgypt Political System1059 Words   |  5 PagesEgypt Political System: Egypt has offered humanity the oldest political system ever. Along the River Nile’s bank, the first central, unified state in the world was formed. Egypt had the precedence in creating the life of a whole nation through the formation of organizational frameworks that had an important role in maintaining the values of democracy and freedom. Egypt’s permanent constitution (issued in September 1971and later amended on May 22 1980) regulates the State’s political system and determinesRead MoreThe American Political System Is Defined As A Constitutional Democracy1228 Words   |  5 PagesThe American political system is defined as a constitutional democracy. Under the Constitution, the federal government has three branches. The legislative power is vested in the Congress and made up of two houses: the Senate and the House of Representatives. The Congress makes laws, controls finances of the country. The President is a head of executive branch, who offers bills to the Congress, enforces federal laws, controls foreign policy, serves as Commander-in-Chief of the Armed Forces and withRead MoreGeorge Washington and Thomas Jefferson Contribution to Stable Government724 Words   |  3 PagesRevolutionary Contributions to Stable Government George Washington and Thomas Jefferson were two important presidents who had an enormous affect on our nation’s stable government and beginning years of our country. Each made their unique contributions to a new government under the Constitution after the failed adoption of the Articles of Confederation. After the war for independence, the Articles of Confederation, began to fail because there was no direct effective way to to collect revenue,Read MoreEssay on Sierra Leone the Struggles of Building a Nation1084 Words   |  5 Pagescoups to Presidential elections! Senior Enlisted leaders, it is important to know that the freedoms we all prefer comes with a cost of sacrifice, bloodshed, and for some, nation before self for democracy. This essay will discuss the background, government, strategic importance, and future direction of Sierra Leone. Background Sierra Leone is located on the West Coast of Africa, its history dates back to 1462 when a Portuguese explorer named Pedro da Cintra detailed his adventures along the coastRead MoreThe Petticoat Affair: Manners, Mutiny, And Sex In Andrew Jacksons White House1237 Words   |  5 PagesHistory 217: U.S. History to 1865 The Petticoat Affair: Manners, Mutiny, and Sex in Andrew Jacksons White House. By John F. Marszalek. (Baton Rouge: Louisiana State University Press, 1997. viii, 296 pp.) John F. Marszalek, author of The Petticoat Affair argues in his book that the Margaret Eaton affair, which plagued the first Jackson administration, was a social situation that had political ramifications. The thesis is that the Jacksonian Presidency brought a change to the office. BringingRead MoreThe Doctrine Of The United States Essay1598 Words   |  7 Pagessettled a boundary dispute along the Sabine River, and firmly established the boundary of the US territory and claims through the Rocky Mountains and west to the Pacific Ocean in exchange for the US paying residents claims against the Spanish government up to a total of $5 million and relinquishing its own claims on parts of Texas west of the Sabine River and other Spanish areas under the terms of the Louisiana Purchase. 1824 Election John Quincy Adams vs. Andrew Jackson (and William H. CrawfordRead MoreThe Black Of The Tuskegee Institute852 Words   |  4 Pageseducators began to increase their involvement in political culture in Haiti through advocacy and education. American educators R.R. Moton and W.T.B Williams of the Tuskegee Institute sought more black involvement in U.S.-Haitian relations. Moton served as Booker T. Washington’s successor at the Tuskegee Institute. He felt a duty to continue Washington’s vision of industrial education for blacks and sought to extend the Tuskegee model into Haiti. He urged President Harding to include blacks on his â€Å"investigationRead MoreThe Petticoat Affair: Manners, Mutiny, and Sex in Andrew Jacksons White House1185 Words   |  5 PagesHistory to 1865 Dr. Fuller November 30, 2003 Cynthia Mihay The Petticoat Affair: Manners, Mutiny, and Sex in Andrew Jacksons White House. By John F. Marszalek. (Baton Rouge: Louisiana State University Press, 1997. viii, 296 pp.) John F. Marszalek, author of The Petticoat Affair argues in his book that the Margaret Eaton affair, which plagued the first Jackson administration, was a social situation that had political ramifications. The thesis is that the Jacksonian Presidency brought a changeRead MoreEssay on Alexander Hamilton and Thomas Jefferson1029 Words   |  5 Pagesmany decisions to be made. In the end of the eighteenth century the Founding Fathers of the newly established America dealt with the difficulties of creating a country with strong political, social, and economic power. With the writing of the Articles of Confederation the country had now developed a national government, but was weak and ineffective. The top leaders of the country knew the flaws of the Articles and gathered together to rewrite the draft. When these decisions makers met in PhiladelphiaRead MoreThe Vietnam War On American Society932 Words   |  4 Pagessociety and how they heightened social, political and economic tensio ns by drafting Americans, creating and repealing the Gulf of Tonkins, uncontrollable war spending, and the protests towards Nixon and his lying. The social relationships in America were already tense due to the inequalities handed out to a large portion of American inhabitants but the relationships worsened during the Vietnam War. Drafting was a very large reason for the strained national affairs. Black men were drafted and sent to

Obesity Media And The Media - 2335 Words

Obesity in Entertainment Media Adam Gasper COM 325 Mass Communication and Society Professor Fisher September 2nd 2016 Obesity in Entertainment Media It’s estimated that nearly 1/3 of people suffer from obesity in North America. Rather than being a part of the solution, the media has a portrayal of what one should and should not look like, what is beautiful and what is not, typically possessing unrealistic standards and showing those that are overweight, as weak-willed individuals, who generally are blue collared individuals. This paper shall discuss obese individuals and how they are portrayed on television or on online streaming programming. Secondly, this paper shall discuss why this group has such a negative portrayal. Third, this paper will discuss what social pressures and production forces shape these portrayals. Finally, this paper will incorporate a media theory and explain what effects it has on the audiences and how obese individuals are typically treated in society. Obese Portrayed in Media Entertainment. The portrayal of obese individuals in entertainment media varies. CBS once had a popular hit sitcom called, Mike Molly. The show shares a story of two blue collar individuals, who are two real people, who have every day issues, who are just simply trying to improve their lives, essentially a story that many others can relate to. Mike is an overweight police officer and Molly is an elementary school teacher who lives with her mother and raunchy youngerShow MoreRelatedEffects Of Obesity And The Media1396 Words   |  6 Pagesincreasing in body weight has changed. Obesity can be contributed to many different factors. With this new world of technology and social media there is still the prominent issue of obesity, although technology and the media is not all to blame. This arising issue can have derived by many different aspects, such as a person’s socioeconomic status, ethnicity, culture, and not getting the right amount of physical activity. These aspects definitively lead to obesity and ultimately the negative feedbackRead MoreMass Media and Obesity1926 Words   |  8 PagesMass Media and Obesity The media in today’s society has shown its advantages and disadvantages in order to attract a certain group of consumers. People are exposed to advertisements every day and everywhere. Ads and campaigns are seen by simply walking down the street; posted on walls, boards, and store windows. Even while driving, advertisements are on billboards in areas where there is heavy traffic. The most popular way companies are selling their products is by doing TV commercials. Most householdsRead MoreObesity And The Mass Media Essay935 Words   |  4 Pagescan resolve a problem, an issue or unknown? I am particularly interested in the contributors to eating disorder, for instance, the relationship between eating disorders to bullying, the media, social environments, and so forth. D. What is your topic about? The research topic is about bulimia and the mass media. The topic will relate to the mental health of female adolescents. There is no set geographic location nor would timeframe for the literature review as I felt it be too constraining. E.Read MoreMedia Influences on Childhood Obesity 1272 Words   |  6 Pagescreating an environment where playing Candy Crush is more popular than playing a sport. Thirty-two percent of children ages 2-19 are overweight and seventeen percent is considered to be obese (Hingle, Dale). The media influence on the youth shows a positive correlation to childhood obesity. Times have changed and due to this new technological era that we live in, children are spoiled with various types as well as numerous electronic devices. Although these advances are rewarding, they are detrimentalRead MoreMedia Coverage Of Childhood Obesity941 Words   |  4 Pages Media coverage contributes to how childhood obesity is framed and stigmatized in Canadian society. The media contributes to changes in popular culture, which can affect how the dilemma of childhood obesity is viewed and addressed. Several forms of media, including campaigns, social media, and the news help to construct popular opinions when looking at the issue. The views provided by different media platforms and organizations help to frame the problem of childhood obesity, and address the problemsRead MoreMedia s Influence On Obesity2115 Words   |  9 Pagesthat using Facebook may contribute to obesity. Of the 470 participants surveyed, those who were avid Facebook users reported to have higher body m ass indexes than those who were not frequent Facebook users. It is evident that widespread use of media has been a factor in aiding the obesity epidemic in the United States. The CDC states that obesity is prevalent in 35% of adult Americans. The impact of media, such as social media, television, and magazines, on obesity has largely contributed to this statisticRead MoreThe Role of the Media in Childhood Obesity Essay694 Words   |  3 PagesThe Role of the Media in Childhood Obesity Since 1980 the proportion of overweight children ages 6-11 has tripled. Today about 10% of 2 to 5 year-olds and 15% of 6 to 19 year-olds are overweight. During the same period in which childhood obesity increased, there was also an increase in media targeted to children. Even children ages 6 and under spend as much time with screen media as they do playing outside. Much of the media targeted to children promote foods such asRead MoreObesity: A Media Created Epidemic Essays698 Words   |  3 Pages What? Me worry? - - Alfred E. Neuman Is obesity really a serious health concern or is the â€Å"epidemic† merely a result of highly fabricated, misleading ideas of politicians and the media? The article, Obesity: An Overblown Epidemic? By W. Wayt Gibbs featured in the May 23, 2005 edition of Scientific America, raises this question. Most health experts and average people believe that obesity is one of the most prevalent health concerns today, resulting in increased risk for other majorRead MoreObesity Is A Victim Of The Media And The Narrow Minded View On Obesity982 Words   |  4 Pagesof the media and the narrow-minded views of the western world, I, along with many others in the US don’t see any other views of health and the meaning of being healthy other than our own. To be honest, while reading the first few sentences of Yates-Doerr’s article Obesity Science and Health Translations in Guatemala, I was taken back at the fact that in Guatemala, â€Å"fatness is associated with health and pr osperity† because that is truly the exact opposite of the popular opinions on obesity today (Yates-Doerr)Read MoreEffects of Daily Media Use on Youth Obesity910 Words   |  4 Pagesdevote an average of 7 hours and 38 minutes...to using entertainment media across a typical day†. Not only that, but most youths also report to having no rules governing the amount of time spent on entertainment media in the mediums of TV, videogames, and any computer use. Less than 50% actually have rules and regulations on what video games they are allowed to play and what TV shows they can watch. However, I believe that daily media use among children and teens needs to be controlled. If it is not

Consumer Law Australian Motor Industries

Question: Describe about the Consumer Law for Australian Motor Industries. Answer: 1. Three strategies adopted towards regulatory compliance The Australian Motors Industries is an automobile assembly firm. This company was started in 1926. The increase tariffs on import on vehicles have enhanced the growth of the Australian vehicle industry. The concessions on tax differed. The industries have started changing and there was a demise of the small body building industries. The Australian company was having English partners, (Eprofitfocus, 2014). The company negotiated with Daimler-Benz in 1958 to distribute and assemble Mercedes Benz in Australia, (Amc, 2016). This way the AMI has started making business and increased the business and also the share market, (Industry, 2016). The strategies applied by them are to make more business by forming agreement with different other automobile companies inside or outside Australia. They use some local made parts while assembling the body of the vehicles which also increase the employment as well as the use of local raw materials. This makes the price of the vehicle affordable for the general people of Australia, (Digplanet, 2016). This will increase the sell of the vehicle which will increase the business of both the company. The amalgamation of the AMI with Toyota has proved to be the milestone of the company. The first car of Toyota that has been made outside Japan was in Australia by AMI. This amalgamation has also increased the rate of shares of the AMI. The company changed its name and the new name was AMI Toyota Ltd in 1985 and was still listed in the stock exchange. Promotion of competition These strategies will indeed promote and increase the competition of the automobile industries in Australia. The amalgamation with different companies outside Australia will become threat to the local automobile industries. The AMI, as it make the body of the vehicle and assemble it will make sure that the cost of assembling should be cut so that the selling price of the vehicle becomes less compare to other companies. This is completely a business strategy. This action will increase the sell of the vehicle, which will enhance the business and will also help to earn more profit. The vehicle company should get profit in the country as this will help in growing the business of AMI. The AMI has started making the Matadors with more specific and modern technologies. They have included power windows, power steering, air conditioning, with an AM Radio. These modern technologies have made the other companies to think about such technologies to implant them in their vehicle. The AMI is doing this with a lower cost with the help of the other companies. This cannot be done by the other companies if they are not amalgamated. The AMI does not compromise with the quality of their work in order to cut the cost. This is one more reason behind the increase in competition of the assembling vehicles in the Australian market. This amalgamation has proved to be a boon for the AMI. Recommendation The AMI should look after the strategies they are making and should change according to the demand and the market. The strategies should change also according to the company it is amalgamating and the employees working therein. Forming an amalgamation means getting into a contract. The agreement made should be according to the law of Australia and not of the law of the country of the other party. The management of the AMI should make the terms of the agreement very consciously so that no misrepresentation is being made in the agreement. Any breach of term or any misrepresentation will make the contract void, and the AMI will be committing an offence. The management of the company should be working properly and should be honest amongst them. This will initiate and enhance in smooth working of the company. The company is should take care of the consumers. It should follow the rules and provision provided in the Consumer law of Australia. The AMI is a company that assembles the body of the vehicles, and also makes the parts of the vehicles. They should think about the customer satisfaction and also should make the vehicle with a price that will be affordable for the general people. The customers, who are the consumers according to the consumer law, should not face any problem regarding the vehicle they are purchasing. Any grievances should be made to the company and the company is bound to look after the problems. It is the duty of the company to look after the comfort level of the customers. And the company is also bound to make or give proper information regarding the vehicle. Any false representation or using of materials below quality will reduce the goodwill of the company. This reduction of goodwill will hamper the company to any extent. At first, the company will move down in the stock exchange, the rate of the shares will also fall down, (Futureinaustralia, 2016). Because of this the contract for amalgamation will also come to an end. Therefore, the manage ment of the company should make strategies and decisions that will comply with the market resulting to competition and will also be according to the provisions of the Competition and Consumer Act. 2. The facts of the case that Bungee World Ltd ("BW), is the worlds highest bungee jumping platform. The name of the platform is Sea Monster. The interested participants has to pay $50 for the jump and has to sign a form where it has been mentioned that the Bungee World Ltd. is nowhere responsible for the death or any injury caused to the participant during the bungee jump and other relevant terms. An investment banker, Loki went for bungee jumping on the Sea Monster. He duly pays the fees and signs the form. After that he went to the platform where he met Kate, who is a bungee instructor. She had been working as an instructor since last 10 years. Kate, got him ready and ensures that his legs are tied up properly to the safety rope. Loki makes the jump and somehow a part of the steel platform has broken down from the main platform. The safety rope was attached to the steel platform. This happened due to the sea moisture. Loki did not get harm severely but had a nervous breakdown. He wants to sue BW for the negligence on its part. There is a case of negligence on the part of Loki. As he has suffered from an injury (emotional distress), he can sue BW for the injury caused to him. For this it is very important to understand the actual meaning of negligence. Negligence in general can be termed as carelessness. It is a kind of tort. In legal terms, it signifies failure to exercise the standard of care which the doer as a reasonable man should understand and have followed the same and have acted in accordance with the circumstances. In general term, there is a legal duty to take care where it should have been forseeable that failure to do the act will cause injury. Negligence is a way in which kinds of harms may be caused, by not taking any adequate measure to avoid during such circumstances. Any harm may be caused to someone negligently though was not careless and tries to be careful, if the care taken was such as the court deems inadequate in the circumstances. For proving the negligence, the plaintiff has to prove that there is a duty of care towards the plaintiff. The duty means a legal duty, (Lawhandbook, 2016). The plaintiff has to proof that the defendant owed to him a certain duty of taking care and has made a breach of it. No definition of duty has been provided anywhere. It depends on the circumstances and it varies from one another. In Donough v. Stevenson (1932), it has been stated that there must be proper and reasonable care that has to be taken care of which can cause injury and can be foreseen. Here, Loki is responsible to proof that the BW is negligible on its part as it could have foreseen the injury that has caused to him, (Ruralandgeneral, 2016). The BW could have taken proper care in order to prevent the injury caused to Loki. Therefore, BW has caused negligence. The duty of the defendant also depends on the reasonable foreseeability of the injury. This means that if during the act, the defendant could have foreseen the damage that may cause to a person or the plaintiff and still he does the act or could not prevent the injury, the defendant is liable for the negligence, (Legalaid, 2016). This has been mentioned in the famous case of Glassgow v Muir (1943). The ability of foreseeing also varies from person to person. If this point is considered, then also BW is responsible for the negligence made on its part that has caused injury to Loki. If the injury is not foreseen, the defendant is not responsible on its part though the plaintiff may sue him. Another point that has to be proved by the plaintiff is that damage has been caused to him. The damage caused to the plaintiff is because of the negligence made on the part of the defendant and the damage could have been prevented, if taken proper precautions. The damage if not proved, the defendant will not be liable for any negligence. The ALRC has divided the damage into two parts, (Alrc, 2016). First, physical injury- an injury that has caused bodily harm or has damaged any body parts and can be seen or make out by other people. Second is the mental injury. Any injury that has cause mental dis-balance or agony, emotional distress, nervous breakdown and similar other things can be termed as mental injury. Here, Loki has nervous breakdown but is not having any bodily injury. If all these conditions are fulfilled and are satisfied then the BW will be held liable. But there is a form that has to be signed by all the participants that BW will not be held liable for any damage caused to the participants. Loki has also signed the said form. Therefore, in this case, BW will not be held liable for the negligence claimed by Loki. But for the near future, BW should take care pf the participants and also maintain the platforms and safety rope properly so that no further accident takes place. 3. What are the National Employment Standards All the workplaces, i.e., companies, industries, factories etc., are guided by the Fair Act, 2009. The National Employment Standards are also guided by the Fair Works Act, 2009, (Fairwork, 2016). The National Employment Standards are the ten entitlements at the minimum level that has to be maintained by all the employment sectors and has to be provided to all the employees of the concerned sector, (TDA, 2016). The ten entitlements referred in the National Employment Standards are: The employees of a concerned should work for 38 hours per work and also additional hours which are reasonable. They are not supposed to work more than that. There must be right given to certain employees who may request the employer to provide for flexible working arrangement. The employees have the right to get an unpaid leave for 12 months and also request for an unpaid leave for another 12 months if required and also get leave for any sort of parental leave. The employees are entitled to get paid leave for four weeks in a year and also additional leave for those employees who are shift workers. The employees are entitled to get unpaid leave willingly for any emergency activities or leave for service of jury where the employees will be paid for 10 days if the take leave for jury service. The employees are entitled to get which comes from a pre-modernised award. The employees are entitled to get 10 days paid personal leave, two days unpaid carers eave and two days compassionate leave, i.e., leave granted under sympathy. The employees are also entitled to get paid leave on the public holidays. Notice up to five weeks must be given before termination and on redundancy; 16 weeks severance pay must be given. The employers should be provided with Fair work Statement and the rolesof Fair Work Commission, (Ieuvictas, 2016). Why do these standards apply The NES applies to all the employees working in the national workplace relations system without any regard to the employment contract, award that applies to the employees. But there are only certain rights, i.e., maximum working hours, carers leave etc., that has been entitled to the casual employees, (Fwc, 2016). Being a head of human resource of an Australian Engineering company, a proper record has to be maintained, the grievances of the employees should be heard of and a sudden inspection has to be made in the company, in order to ensure that the company is not contravening any of these standards, (Awu, 2016). 4. The fact of this case is that Rebecca, who is an old woman, lives alone in Brisbane. The only language in which she can communicate is English. This is because she has recently migrated to Australia from Italy. She receives a call one day from Dave, who is a representative of a plumbing company. The call was made randomly for a general plumbing check for free. Dave tried to make Rebecca understand that this plumbing check was for free, just to check the condition of the pipes and taps of her house and it does not include any liability. She agreed for the plumbing check and on the very next Dave went to her house. After the checkup, Dave concluded that the pipes and taps are in good condition, (Consumerlaw, 2016). He then suggested Rebecca to buy an Ono filter which contains latest reverse osmosis technology for $2,000, including the installation. He said that he is having one unit of the said filter in his vehicle parked outside, (Australiancontractlaw, 2016). Rebecca did not want to buy the filter but after and was not interested to spend any money. But as Dave went on convincing her for two hours, Rebecca at last got convinced and she signed the contract for buying the Ono filter, (Legislation, 2016). She did this under pressure and not by her consent, (Lawbuddy, 2016). Next Dave stated that if she refrains from the cooling-off period then he could install the filter and Rebecca agrees in doing so, (Libguides, 2016). The issue is that Rebecca does not have any complain against the filter as it was working properly. But she did not have any need for the filter and she felt pressurized to sign the contract. The law which is applicable in this case is the contract which has been made is by undue influence, (Lawhandbook, 2016). Undue influence means a situation where one party dominates the will of the other party and takes the unfair advantage of the position over the other party. The agreement made under such term is voidable at the option of the party who was forced to enter into the agreement. There is no remedy or rights available for Rebecca under Section 21 of the Australian Consumer Law, (Consumerlaw, 2016). All she can do is to give an application before the court, where the court after it is satisfied will set aside the said agreement. Reference Alrc. (2016). Negligence. Retrieved October 04, 2016, from alrc.gov.au: www.alrc.gov.au 7. Fault Amc. (2016). Australian Motors Industries. Retrieved October 04, 2016, from hudson-amc.org.au: www.hudson-amc.org.au/historical/ami-the-start.htm Australiancontractlaw. (2016). Australian Contract Law. Retrieved from australiancontractlaw.com: www.australiancontractlaw.com AUSTRALIANCONTRACTLAW. (2016). Australian Contract law. Retrieved from australiancontractlaw.com: www.australiancontractlaw.com/legislation/cthacl.html Awu. (2016). National Employment Standards. Retrieved October 04, 2016, from awu.net.au: https://www.awu.net.au/national-employment-standards Consumerlaw. (2016). Australian consumer law. Retrieved October 04, 2016, from consumerlaw.gov.au: https://consumerlaw.gov.au Consumerlaw. (2016). The Australian Consumer Law. Retrieved October 04, 2016, from consumerlaw.gov.au: consumerlaw.gov.au/the-australian-consumer-law Digplanet. (2016). Australian Motors Industries. Retrieved October 04, 2016, from digplanet.com: www.digplanet.com/Australian_Motor_Industries Eprofitfocus. (2014). 2014 Australian Motor Industry Overview. Retrieved october 04, 2016, from eprofitfocus.com: https://www.eprofitfocus.com/market-intelligence/motor-industry... Fairwork. (2016). National Entitlement Standards. Retrieved October 04, 2016, from fairwork.gov.au: www.fairwork.gov.au Employee entitlements Futureinaustralia. (2016). Major industries in Australia. Retrieved October 04, 2016, from futureinaustralia.com: www.futureinaustralia.com/students/major-industries-in-australia Fwc. (2016). National Employment Standards. Retrieved October 04, 2016, from fwc.gov.au: www.fwc.gov.au Minimum wages conditions Ieuvictas. (2016). National Employment standards. Retrieved October 04, 2016, from ieuvictas.org.au: www.ieuvictas.org.au/files/8613/4214/4413/nes.pdf PDF file Industry. (2016). Automotive industry. Retrieved October 04, 2016, from industry.gov.au: www.industry.gov.au/Industry/IndustrySectors/Automotive/Pages/... Lawbuddy. (2016). Contract Law in Australia. Retrieved October 04, 2016, from lawbuddy.com.au: www.lawbuddy.com.au/knowledge-base/contracts-in-australia Lawhandbook. (2016). elements of contract. Retrieved October 04, 2016, from lawhandbook.org.au: www.lawhandbook.org.au Contentsl Lawhandbook. (2016). Negligence. Retrieved October 04, 2016, from lawhandbook.sa.gov.au: www.lawhandbook.sa.gov.au ACCIDENTS AND INJURIES Legalaid. (2016). Negligence. Retrieved October 04, 2016, from legalaid.wa.gov.au: www.legalaid.wa.gov.au Birth, life, death Personal injury LEGISLATION. (2016). Australian Consumer Law and Fair Trading Act 2012. Retrieved from legislation.vic.gov.au: www.legislation.vic.gov.au/Domino/Web_Notes/LDMS/PubStatbook.nsf/f LEGISLATION. (2016). Competition and Consumer Act 2010. Retrieved from legislation.gov.au: https://www.legislation.gov.au/Details/C2013C00004/Html/Volume_3 Legislation. (2016). Competitoin and consumer act 2010. Retrieved October 04, 2016, from legislation.gov.au: https://www.legislation.gov.au/Details/C2013C00620 Libguides. (2016). Contract Law. Retrieved October 04, 2016, from libguides.acu.edu.au: libguides.acu.edu.au/c.php?g=234001p=1553441 Ruralandgeneral. (2016). What is Negligence. Retrieved October 04, 2016, from ruralandgeneral.com.cu: www.ruralandgeneral.com.au/insurance-consumer-what-is-negligence.php TDA. (2016). National Entitlement to Training. Retrieved from tda.edu.au: www.tda.edu.au/cb_pages/...National_entitlement_to_training_V4.pdf PDF

Identification of Radio Frequency-Free-Samples-Myassignmenthelp

Question: Discuss about the Radio Frequency Identification Technology (RFID). Answer: Technology has become an integral part of the business processes and operations that are carried out in the business organizations. There are several new components of technology that are being created with each passing day and technology has been changing at a very rapid rate. One of the recent advancements in the field of technology is Radio Frequency Identification technology (RFID) (Jechlitschek, 2013). The document covers the details of RFID along with its advantages, limitations and applications. Radio Frequency Identification (RFID) Technology Meaning Working Radio Frequency Identification which is commonly known and abbreviated as RFID is the technology that identifies the presence of a particular object on the basis of the radio signals. RFID is a technology that can be used for the identification of various different entities such as people, items, packages and likewise. RFID is being increasingly used in the business organizations for a variety of different purposes (Kaur, 2011). Working of RFID is based upon three primary components as RFID tag or a smart label, RFID reader and a smart antenna that is used in the RFID system. RFID tag is the component that is present in the RFID system which consists of integrated circuit along with an antenna. Both of these components assist in the transmission of the data and information to RFID reader. RFID reader is the component that collects the information and converts the radio waves in usable format. The information that is collected from the RFID tags is then gathered and stored in a database system which allows the system experts to analyze the information at later stages (Weis, 2015). Working of RFID System RFID is a technology that comes under the broader group of technologies as Automatic Identification and Data Capture (AIDC). The RFID tags that are present in the RFID system also comprise of a protective material to make sure that these tags stay protected from a number of different environment conditions. Business/Technical Problems Solved by RFID There are a number business and technical problems that are solved by the application and installation of RFID systems. There are a number of assets that are associated with the organizations that get lost or become difficult to find when needed. Tracking and management of these assets can be easily done with the aid of RFID systems. RFID technology can be used by installing the RFID systems in the assets which would allow the management to keep a track of the assets at all times. There are a number of employees that are engaged with the business organizations. There are chances that physical security may not be sufficient for authentication and identification of these employees which may bring up several issues for business organizations. It is in these cases that RFID comes into picture and can be easily used for tracking and management of human resources and people (Want, 2006). Organizations face a lot of technical trouble in managing and monitoring the documents that are associated with it. There are scenarios associated with loss of documents or mismanagement issues. RFID system can be installed for document tracking which would allow lesser time to be spent in the tracking of the documents. Also, there are severe legal obligations that may come up in case of a loss of document which is also avoided. Limitations of RFID There are however certain limitations that is associated with RFID systems and applications which are as listed below. There is still no RFID standard that has been created as yet. It is because of this reason that there may be issues associated with standardization. There are technical issues that often come up in case of RFID tags that lead to problems such as compromised functioning. Cost is also one of the limitations that have been observed in association with RFID tags. The cost of an overall RFID system is much higher as compared to that of the barcode system. There are security and privacy concerns that are also associated with RFID systems. The consumers that make use of the products that have the RFID tags installed in them can be easily and conveniently traced. There is also a great risk to the privacy of the product as the serial numbers and product codes can be easily obtained (Iyer, 2005). There can be interference of the radio signals with other radio frequencies along with radio transmissions, metals, liquids and many other materials. There can also be reader and tag collisions that may result in the disruption of the regular functioning of the entire system (Bakir, 2013). Organizations Implementation of RFID Wal-Mart There are several organizations that have implemented RFID systems in their architecture and have gained a number of benefits with the implementation of the same. A number of retail stores suffer from the problems associated with inventory management due to the absence of real-time data and bullwhip effects. RFID systems have been implemented and used by the retail stores to overcome the inventory issues and one such organization that has made use of these systems is Wal-Mart. Wal-Mart has established itself as the largest retailer on a global platform. However, there were a number supply chain issues that were emerging in the organization and these issues were becoming difficult to deal with. Wal-Mart implemented RFID systems to improve its supply chain management and supply chain systems. RFID systems have allowed Wal-Mart to have higher efficiency and accuracy in the ordering decisions and other supply chain activities as well. In the first phase of the implementation, the organization mainly used RFID systems for the tracking of pallets of merchandise travelling all across the organizations supply chains and warehouses. There were marked improvements that were observed in terms of monitoring, management, tracking, efficiency and accuracy. Volume of excess inventory was controlled with the aid of RFID systems in the next phase of implementation (Kosasi, 2014). There has been a transformation in the way Wal-Mart runs all of its retail stores after the implementation of RFID in its architecture. The movement of the goods can now be easily tracked and managed. Also, stocks can be easily shelved using the radio frequency tags. Prospects of RFID for Success in the Marketplace There are a number of different prospects of RFID in the marketplace in various business and industry sectors. RFID is being used and is expected to be used at a larger scale in the supply chain and inventory management activities in the manufacturing units, retails stores and production houses. These systems can also be used in transportation industry for easy tracking and management of the vehicles and for offering better services to the customers. In the field of healthcare, patient safety and overall management can be achieved with the aid of RFID systems (Nambiar, 2009). There can be higher use of RFID systems with the development of the standards and enhancement of the technology. One of the key limitations of an RFID system at present is the security and privacy concerns. Once, these limitations are overcome then there will be enhanced use of the technology in the market. Conclusion Technology has evolved and expanded itself over the years and one of the latest contributions in the field of technology is Radio Frequency Identification (RFID). There are a number of business and technical problems and issues that are resolved with the application of RFID systems and tags. It is necessary to make certain advancements and enhancements in the RFID technology in order to make it more secure and to make sure that there are increased number of applications of the same. References Bakir, Z. (2013). Limitations of Forward and Return Links in UHF RFID with Passive Tags. Retrieved 20 June 2017, from https://ijettjournal.org/volume-5/number-5/IJETT-V5N5P145.pdf Iyer, S. (2005). RFID:TechnologyandApplications. Retrieved 20 June 2017, from https://www.it.iitb.ac.in/~sri/talks/rfid-05.pdf Jechlitschek, C. (2013). A Survey Paper on Radio Frequency Identification (RFID) Trends. Retrieved 20 June 2017, from https://www.cse.wustl.edu/~jain/cse574-06/ftp/rfid.pdf Kaur, M. (2011). RFID Technology Principles, Advantages, Limitations Its Applications. Retrieved 20 June 2017, from https://www.ijcee.org/papers/306-E794.pdf Kosasi, S. (2014). How RFID Technology Boosts WalMart's Supply Chain Management. Retrieved 20 June 2017, from https://www.jitbm.com/24th%20Volume%20JITBM/3%20Supply%20Chain%20Management.pdf Nambiar, A. (2009). RFID Technology: A Review of its Applications. Retrieved 20 June 2017, from https://www.iaeng.org/publication/WCECS2009/WCECS2009_pp1253-1259.pdf Want, R. (2006). An Introduction to RFID Technology. Retrieved 20 June 2017, from https://www.cs.colorado.edu/~rhan/CSCI_7143_001_Fall_2002/Papers/rfid_intro_01593568.pdf Weis, S. (2015). RFID (Radio Frequency Identification): Principles and Applications. Retrieved 20 June 2017, from https://www.rfid-off.com/uploads/4/5/1/2/45128343/rfid-article_mit_usa.pdf